Build your own PBX
Kerry Garrison - Building your own PBX
Building Your Own PBX with Asterisk
Kerry Garrison
What would it mean to you to have your own full-featured PBX system at your home or small office? What would it mean to you if you could build an entire PBX system (minus the phones) on hardware you probably have laying around, AND that it can probably also save you money on your phone bill? Sounds too hard to believe doesn’t it, but using old hardware and some open source software, you really can build a commercial quality phone system that would normally cost thousands of dollars.
The Hardware
As I mentioned in the opening, we are going to build our PBX system from equipment that we have laying around the house. After cannibalizing three spare systems, what was left was a PII 450, 386mb RAM, 12gb HD, 48x CDROM drive, and an Intel Pro 10/100 network card. This is all you “need” to get going as long as you are going to get VOIP dial tone service from a company like BroadVoice (more on this later). If you want to use regular analog phone lines you will need modem card. Not every card will work properly, however, the most recommended card is the Digium Wildcard X100P FXO card which can be purchased brand new on eBay for $6.95 each. So far, total out of pocket expense for the card plus shipping: $12.90.